The router, the forgotten front door

Everything that connects to the internet at home goes through the router: computers, phones, TVs, cameras, voice assistants. Yet we configure it once, or never, and forget it. A poorly protected router lets a neighbour use your connection, an attacker watch your traffic or redirect your visits to fake sites, and fragile connected devices expose everything else.

Good news: the settings that matter are few. To reach them, open the browser and type the address printed under your router (often 192.168.0.1 or 192.168.1.1), or use the provider's app. If your router is lent by your internet provider, some settings may be limited or managed by them.

1. Change the admin password

The password that protects the router's configuration page is different from the Wi-Fi one. Factory values (“admin”, “password”) are known to everyone. Choose a long, unique password, stored in a password manager.

2. Choose good Wi-Fi encryption

Use WPA3 if your router and devices support it, otherwise WPA2 with AES encryption. Never use WEP or an open network (no password) for your main network.

3. Use a strong Wi-Fi password

A long passphrase (four or five unrelated words) holds up far better than a short word. Avoid your address, your name or your phone number. Change it if you have given it to many people.

4. Turn off WPS

WPS (the button or eight-digit code that makes connecting easy) has known weaknesses. Turn it off if it is on: connecting with the password takes ten seconds longer.

5. Update the firmware

The router has internal software (the firmware) that receives security patches. Turn on automatic updates if available, otherwise check periodically. See our article on security updates.

6. Turn off remote administration

Turn off access to the configuration page from the internet: you almost never need it, and attackers target it. Also turn off UPnP if you do not need it, because it lets programs open ports on your network without asking you.

7. Create a guest network

A guest network separates visitors, and ideally your unreliable connected devices, from your computers. If a camera or a smart bulb is hacked, it cannot reach your files. See also the article on the Internet of Things.

8. Check the list of connected devices

The router page or app shows the devices plugged in. An unknown device may be a neighbour or an intruder: change the Wi-Fi password and check again.

9. Think about DNS

DNS translates site names into addresses. An encrypted or privacy-friendly DNS limits what your provider sees. Look at secure DNS options for your router.

10. Replace a router that is too old

A router that no longer receives updates is a permanent risk. If it is more than five to eight years old, or the maker has ended support, replace it, or ask your provider for a new device.

How to tell whether a router has been compromised

  • Your settings have changed without you touching them (DNS, password, redirects).
  • Familiar sites redirect you to strange pages or unusual ads.
  • The connection becomes abnormally slow, or the activity light blinks when nothing is in use.
  • Unknown devices appear in the list of connections.
  • The maker or your provider has announced a flaw affecting your model.

If in doubt, reset the router to factory settings (the “reset” button), update the firmware before reconfiguring it, then start over with new passwords. Then check that the DNS settings have not been changed.

The router lent by your provider

Many homes use the modem-router supplied by the internet provider. It is often updated remotely by the provider, which is an advantage, but some settings are locked. In that case, change the ones you can (passwords, WPS, guest network), and ask the provider to replace the device if it is too old. You can also plug your own router behind theirs.

What about a VPN?

A VPN encrypts your connection to a server and hides your IP address from the sites you visit, but it does not replace a well-configured router. Choose a VPN carefully.

Your checklist

  1. Change the admin password.
  2. Turn on WPA3 or WPA2-AES and a strong Wi-Fi password.
  3. Turn off WPS and remote administration.
  4. Update the firmware.
  5. Create a guest network for visitors and connected devices.
  6. Check the connected devices.

In short

Half an hour is enough to close the most common doors. When you are out, the same precautions apply to public Wi-Fi networks.